Diamond Solid Thin Drills

APPLICATION: drilling smooth and clean holes in a wide variety of:

  • advanced ceramics
  • ultra hard & brittle materials
  • glass & quartz
  • composite materials
  • optical glass
  • natural & synthetic
  • stone semi-precious & precious stone
  • many other materials

ELECTROPLATED & SINTERED (METAL BONDED)

MULTI LAYERED ELECTROPLATED DIAMOND SOLID DRILLS - FLAT BOTTOM CYLINDER

Most popular type of diamond drills for drilling small holes for jewelry (stone, glass, & many other materials). Multiple layers of diamond provide longer drilling life, faster & freer drilling. Available from stock from 0.75mm to 2.5mm

METAL BOND (SINTERED) DIAMOND SOLID DRILLS

Will last significantly longer than electroplated diamond solid drills. Recommended for drilling Ultra Hard Materials (harder than 8 on mohes scale or 60 on Rockwell Scale. Available in stock from 0.8mm to 6mm diameter.

ELECTROPLATED SMALL HOLLOW DIAMOND CORE DRILLS

The hollow core shape provides extra stability for deep drilling. Available from stock in 1mm to 3.5mm OD.

ELECTROPLATED DIAMOND TWIST DRILLS

Twisted diamond drills are typically used for drilling pearls and enlarging/reaming holes in large variety of other materials. Provide faster drilling speeds, than most other type of diamond drills. Also very popular for drilling pearls.

Electroplated Diamond Solid Thin Drills manufactured by UKAM Industrial have Multiple Layers of Diamond (3 Layers), not just 1 layer of diamonds like conventional electroplated drills. This provides longer drilling life, faster and freer drilling action, & more consistent performance Getting the most from your Drilling operation: Drill Usage Instructions & Recommendations

DIAMOND PLATED SOLID THIN DRILLS 

Diamond Plated Solid Thin Drills have high diamond concentration and give a smother, faster drilling action with minimum heat generation. Drilling Depth (mm): 1.25" (31.75mm) Recommended Operating Speed: 9,000-12,000 Maximum Operating Speed: 30,000. For Best Results: Always drill with a coolant and use submerged-pressure sensitive feed. Recommended Coolant: water, for ultra hard materials best results will be achieved with mineral oil or synthetic water soluble coolant. Superior Design that is Easier to Use Smooth Surface Finish Quality Fast Drilling & Consistent Performance Superior Quality & Consistency

MULTI LAYERED ELECTROPLATED DIAMOND SOLID DRILLS - FLAT BOTTOM CYLINDER

most popular type of diamond drills for drilling small holes for jewelry (stone, glass, and other materials)

Sold in Pack of 6 units Head Length: 15.00mm (.591") Drill Length: 45.00mm (1.772") Shank Diameter is slightly smaller than diameter of diamond drill tip Drilling Depth (mm): 1.25" (31.75mm) Recommended Operating Speed: 7,000-10,000 Maximum Operating Speed: 30,000. USED ON: High Speed Drill Press, Mounted Hand Piece Drill (such as: Foredom & Dremel), High Speed Air Spindles. APPLICATION: drilling smooth and clean holes in a wide variety of: ceramic, tile & related materials advanced ceramics glass & quartz optical materials composites natural & synthetic stone semi-precious & precious stone many other materials