661-257-2288
No products in the Quote Basket.
UKAM Industrial Superhard Tools is a Leading Manufacturer & Authority on Precision Diamond & CBN Wafering / Sectioning Blades, Diamond Discs, Sectioning / Wafering Saws, & Grinders/Polishers . used for just about any application. Our High Precision & Ultra Thin Diamond Wafering Blades will work on all popular low & high speed sectioning / wafering saws. Such as BUEHLER, STRUERS, LECO & many others. And larger machines such as precision cutting machines, abrasive cut off saws & other equipment.
Our products Trusted by Customers from over 4,000 Research Universities, National Labs, As well as Fortuen 500 companies and technology start ups. We support scientists and engineers around the world with high quality consumables and equipment at an affordable price.
Used On: All Low & High Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others. SMART CUT™ Precision New Generation Sintered (metal bonded) Diamond & CBN Wafering Blades are the most widely used type of wafering blades for almost all materials and applications. Available from stock from 3” (75mm) to 8” (200mm). Thicknesses range from .004” (100 microns) to .035” (0.8mm). Stadard arbor size is ½” (12.7mm). arbor size can be modified to anything you want usually same day. Large Variety of diamond & cbn grit sizes, concentrations, bond hardnesses. Choose from 21 different blades, including 5 different diameters and high or low concentrations to fit almost any application (Series 30HCU to 5LCU)
Used On: All High Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others. Can be used on lower speed cutting machines if RPM’s are above 1,000. Available from stock from 4” (100mm) to 8” (200mm). Thicknesses range from .015” (0.38 mm) to .035” (0.8mm). Stadard arbor size is ½” (12.7mm). arbor size can be modified to anything you want usually same day. Recommended for applications where cut quality and surface finish is very important. Resin Bond Diamond & CBN Waferings offer far superior cut quality than the finest size metal bond (sintered) bade. Most commonly used at higher speeds
Used On: All Low & High Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others.Available from stock from 4” (100mm) to 8” (200mm). Thicknesses range from .010” (0.25 mm) to .035” (0.8mm). Stadard arbor size is ½” (12.7mm). arbor size can be modified to anything you want usually same day. Nickel Bond Diamond & CBN Wafering Blades usually have a single layer of diamonds, held by a tough durable nickel alloy. diamond particles to protrude from the bond matrix, providing a free, faster cutting action with minimum heat generation. Recommended for cutting softer and more gummy materials, where sintered (metal bond) diamond wafering blades load up or glaze over frequently.
Used on all popular laboratory & abrasive cut off saws such as Buehler, Struers, Leco & mnany others. Available from stock from 10” (254mm) ot 16” (400mm).Kerf Thickness from .040” (1mm) to .085” (2.2mm). Arbor sizes: ¾”, 1”, 1.25”, 32mm. we can alter the arbor size to anything you want usually same day (if needed). Available in Many Different Grit Sizes, Concentrations & specifications to fit your requirements.
Used on all popular laboratory & abrasive cut off saws such as Buehler, Struers, Leco & mnany others. Available from stock from 10” (254mm) ot 16” (400mm). Kerf Thickness from .040” (1mm) to.085” (2.2mm). Arbor sizes: ¾”, 1”, 1.25”, 32mm. we can alter the arbor size to anything you want usually same day (if needed). Available in Many Different Grit Sizes, Concentrations & specifications to fit your requirements
Used on all popular laboratory & abrasive cut off saws such as Buehler, Struers, Leco & mnany others. Available from stock from in continuous rim and slotted designs from 10” (254mm) to 14” (350mm). Kerf Thickness from .040” (1mm) to 125” (3.2mm). Arbor sizes: ¾”, 1”, 1.25”, 32mm. we can alter the arbor size to anything you want usually same day (if needed). Available in Many Different Grit Sizes, Concentrations & specifications to fit your requirements
Used On: All Low & High Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others. Available from stock from 4” (100mm) to 8” (200mm). Thicknesses range from .012” (0.3 mm) to .035” (0.8mm). Stadard arbor size is ½” (12.7mm). Our SMART CUT series Ultra Thin Abrasive Cutt off blades are Formulated for fast sectioning with minimum kerf loss. They Provide for cool cutting action & Minimize the structural damage to the sample/material. The silicon carbide wheels are formulated for non-ferrous and non-metallic materials. The aluminum oxide wheels are designed for ferrous materials.
Used On: All High Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others. Choose from a large selection (57 different wheels) of application specific blades. The silicon carbide wheels are formulated for non-ferrous and non-metallic materials. The aluminum oxide wheels are designed for ferrous materials. Coarse grits will cut heavier sections faster and cooler. Fine grits produce better surfaces and less burning on delicate pieces. Soft wheels break down faster exposing new cutting surfaces more rapidly - preferred for hard materials. Hard wheels break down slower, wear longer and are recommended for softer materials
Used On: All Low Speed Wafering Saws, Sectioning Saws, Such as Buehler, Struers, Leco, & many others. Ultra thin, fine teeth tungsten Carbide blades are available from 3” (75mm) to 8” (200mm) OD, thickneness from from .004” (100 microns). Standard arbor is ½”, but can be made any size. Ttypically used on low speed cutting machine. Typical application are materials where diamond cannot be effective used such as green ceramics, PC Board substrates, fiberglass, laminates, MLP/QFN, and similar materials
Used on: rotary hand pieces such as Dremel, Foredom, Die Grinders, Milling Machines, & other machines Used for cutting, slotting, grinding & polishing large variety of hard to soft materials. Diameters available from 18mm to 3.0”. Thicknesses from .040” to .250”. Arbor size from 1/16” to 1.25” or with mandrel. Bond types sintered (metal bond), resin bond, nickel bond, braised bond
Used on larger laboratory cutting machines, slabb saws & other equipment for Cutting large variet of hard to soft Materials. Available from 18” to 36” Diameter from stock. Continuous rim, narrow spacing between the segments and wide segment spacing. Thicknesses from .085” (2.15mm) to .125” (3.2mm). Standard arbor size is ¾ and 1”. Arbor size can be modified to anything you want same day if needed
Diamond Band Saw Blades are used for cutting large variety of ultra hard to soft materials wet or dry. Available to fit just about any type of Band Saw Machines. Starting from .020” (0.5mm) to .040” (1mm) thickness. Widths from ¼” to 1.5”. Length any from 36” and up. Blades are available from stock on spool and cut and welded to any length. Diamond Grit sizes available from 35/40 to 120 mesh.
Diamond Wire for almost all laboratory and larger diamond wire saws. Used for cutting large variety of ultra hard to soft materials. Available in diameters from 0.1mm to 3mm thickness. Made for your application. From Loops short as 84cm to spools hundreds of meters long
Wheel Stiffeners provide stability, rigidity & additional support for your blades. They help in prventing the blade from loosing wobbling and loosing its fltantess or breaking. They are placede between your existing flanges to reduce the blade exposure. Wheel Stiffeners are made to order can can be any diameter, thickness or arbor size to fit any type of cutting machine such as Buehler, Struers, Leco & many others . Lead time is few days.
large variety of flanges to fit many precision lab cutting machines diameters available from stock 35mm to 90mm with 1/2" and 5/8" arbor. Flanges are designed to add additional support and stability to both sides of the cutting blade. Flanges prevent the blade from losing its tension flatness, warping, loosing flatness, slanting cuts, blade wreckage and damage to blade and material
SMART CUT water soluable coolants & Mineral oils are are designed for use on all high and low speed sectioning/wafering saws, laboratory/abrasive cut off saws. Such as Buehler, Struers, Leco & many others. SMART CUT Enviromental Friendly & Non Hazardous Coolants help reduce amount of heat generated while sectiong and provides needed lubrication to blade and sample being cut. Its usage will help increase Blade Life, Reduce Material Damage or micro cracks associated with overheating, Improve Cutting Speed, Improve Surface Finish, MinimizeChipping, Preserve Material microstructure
Dressing Sticks are available from stock to fit all types of diamond, cbn, abrasive wafering & cut off blades and sectiong saws. Such as Buehler, Struers, & Leco. Available in different sizes, grits, and abrasive types
We offer many different chucks, vices, & holding fixtures are available for many low and medium speed saws such such as Buehler, Struers, Leco, & many Others. Shuch as Single Saddle Chuk, Double Saddle chuck, Ireegular sSpecimen Chuck, Wafer Cuck, Mount Chuck, Fastener Chuck
Universal Vices & clamps are available to fit the T slot table of most laboratory/abrasive cut off saws such as Buehler, Struers, Leco, & many others. Examples of vices available as standard include Vertical clamping Vices, Riser Blocks, Horizontal Clamps, Chain Clamping vices, height adapters arm extensions, V blocks. We can also design and produce many different types of material/sample holding fixtures for uncommon applications
We offer sectioning and cutting services for large variety of materials for organizations that don’t have the necessary equipment, process and expertise needed to acomplish their objectives
UKAM Industrial Superhard Tools is a Leading Manufacturer a full range of Precision Diamond Core drills from .001" to 48" Diameter, & Drilling Accessories for drilling just about any Material/Application. Diamond Drills are available from inventory in many different specifications, outside & inside diameters, drilling depths, bond types, diamond mesh sizes, mountings, & tolerances. We will work with you to determine your needs, and recommend the right solution for your specific material/application
Our metal bond diamond discs can be used on all popular grinding & polishing machines designed for sample preparation. Such as Buehler, Struers, Leco & many others. Available in 8” (200mm), 10” (250mm) & 12” (300mm) OD with psa adhesive or magnetic backing or no backing Designed for sample preparation of advanced, ultra hard & brittle materials, optical materials, composites, ceramics, metals, and petrography specimens. Diamond Sizes available from 250 to 6 microns
Our resin bond diamond discs can be used on all popular grinding & polishing machines designed for sample preparation. Such as Buehler, Struers, Leco & many others. Available in 8” (200mm), 10” (250mm) & 12” (300mm) OD with psa adhesive or magnetic backing or no backing Designed for sample preparation of advanced, ultra hard & brittle materials, optical materials, composites, ceramics, metals, and petrography specimens. Diamond Sizes are available from 160 microns to 6 microns
Our Nickel Bond Diamond Stips are used for used for fast grinding . The Strips can be made of any length & Width. Diamond Sizes are available from 250 microns to 6 microns Our resin bond diamond polishing strips are used for manual & hand grinding and polishing large range of ultra hard to soft materials. The strips can be made any length and width. Diamond Sizes are available from 160 microns to 6 microns.
Our high quality SiC Grinding Papers are Comparable to Buehler, Struers, Leco & many others. They are used for coarse and fine grinding of a wide variety of materials and metallurgical specimens (specially metals). The advantage of using SiC paper include: Easy to use, Repeatable - Relatively lower cost to other options. available in plain and Pressure Sensitive Adhesive (PSA) backing. Please note that other sizes, hole diameters, and grit sizes are available. The grit sizes listed are USA standards. Available in US ANSI grit sizes from F60 to F1200
Abrasive Sheets are fabricated with high quality C weight paper used for coarse and fine Wet/Dry grinding of a wide variety of materials and metallurgical specimens. Our durable industry leading silicone carbide sheets are available in a standard size of 9”x 11” with plain and Pressure Sensitive Adhesive (PSA) backing. Please note that other sizes and grit sizes are available.
Diamond Belts are being used extensively in wet grinding and polishing applications throughout the Aerospace, Ceramics, Glass, Paper and Stone industries. Advantages are consistent finish, increased productivity and reductions in downtime and abrasive costs. The very long life span of these belts make them an attractive option compared to conventional abrasive belts such silicon carbide or alumina oxide.
We offer large variety of polishig pads from 8” (200mm) to 12” (300mm) diameter with PSA ahesive or magnetic backing. Comparable to Buehler, Struers, Leco & many others. Polishing cloths are avaible with different fiber height (nap) and stiffness/resiliency of fiber. Lower nap (also non-woven) and stiffer fiber cloths are used for the rough polishing steps. These types of polishing cloths or pads are very effective in removing sectioning damage done by cutting and coarse grinding. Higher napped polishing cloths provide a more gentle abrasive interaction for the final polish.
For longer life, coarse grinding zirconia abrasive disks are especially useful. Zirconia abrasives are much more durable than either alumina or silicon carbide abrasives, however, to be effective higher applied grinding forces are required.
Lapping Films are ultra-fine, uniformly coated abrasive high performance films for use in lapping and polishing operations. Comparable to Buehler, Struers, Leco & many others. These are available from 8” (200mm) to 12” (300mm) with psa adhesive and no backing. Lapping films are available in silicon carbide, alumina and diamond abrasive . These are used for metal, ceramic, electronic, and lapidary fields. These films are ideally suited for use on flat lapping surfaces where slurries of fine abrasives are used. The coatings are extremely dense and may be used wet or dry.
Abrasive Belts are offered in aluminum oxide, silicon carbide and zirconia alumina. Comparable to Buehler, Struers, Leco & many others. Our belts are resin bond for both wet and dry use. Please note that other sizes and grit sizes are available. Grit sizes from 40 to 400 mesh. Dimensions: 4” x 36” to fit most abrasive grinding machines
For longer life, coarse grinding zirconia abrasive disks are especially useful. Zirconia abrasives are much more durable than either alumina or silicon carbide abrasives, however, to be effective higher applied grinding forces are required.
Abrasive Rolls are fabricated with high quality C weight paper used for coarse and fine Wet/Dry grinding of a wide variety of materials and metallurgical specimens. Our durable industry leading silicone carbide rolls are available in plain backing. All rolls are wrapped around 1/2” paper cores, except 4” rolls which are wrapped around 3-3/8” diameter plastic spools with 1” center holes. Please note that other sizes and grit sizes are available.
We offer large range of Alumina and Silicon Carbide Powders for polishing samples. These can be mixed with distilled water to create various consistencies, based on your desired mix ratios. Alumina powders are used for final polishing of metallographic specimens. Accurately controlled purity levels and particle size distribution assure optimum polishing results. Mix with DI water to produce a liquid slurry. Silicon carbide powders are used for grinding petrographic thin sections and for flat lapping of hard metal plates.
Used for final polishing, colloidal and alumina suspensions are mixtures of abrasive particles dispersed throughout a chemically aggressive liquid carrier. This combination provides a chemical-mechanical polishing action, resulting in deformation-free surfaces. Our Abrasive Suspensions allow for versatility of application by automatic, manual or gravity fed systems. Our liquid carrier permits the particles to remain totally suspended, thus avoiding agglomerates and sedimenting. Sizes Available: 0.5 µm, to 5µ
Lubricants are used to enhance the polishing performance of diamond suspensions, compounds, sprays and films. They reduce friction and increase the life of polishing cloths. All 16 and 32 oz. bottles include trigger sprayer and flip-top for dispensing. Apply manually or with automatic dispensing systems. Our Lubricants have been specially designed to allow for versatility of application by automatic, manual or gravity fed systems. Our liquid carriers permits the particles to remain totally suspended, thus avoiding agglomerates and sedimenting. Available in 16 oz (480 ml), 32 oz (950 ml), 128 oz (3.8 L) & 640 oz (19 L) containers
We offer a wide range of water-based and oil-based diamond suspensions, tailored to the requirements of specific applications. diamond suspensions are specially formulated to allow for versatility of application by automatic, manual or gravity fed systems. Comparable to Buehler, Struers, Leco & many others. Available form 0.05 to 45 microns, in 125ml, 250ml, 500ml, 1 L, 1 gallon, 5 gallon containers. Our Diamond suspensions are used during the sample preparation stages for fast stock removal and to produce a perfect polished surface ready for analysis. Monocrystalline diamond will provide a good performance for most processes. Polycrystalline diamond is recommend polishing hard or sintered materials. Our Environmentally Safe Pump Dispensing - No CFC, Nontoxic, Noncombustible, Water-based formulations
Our diamond compounds (pastes) are formulated using our tightly graded diamond powders and proprietary carriers for fast cutting action, excellent surface finish and easy cleanup. Comparable to Buehler, Struers, Leco & many others. They are available as natural diamond, synthetic monocrystalline diamond polycrystalline diamond. Available from 0.1 micron to 45 micron diamond sizes. In 5 and 20 gram syringes specifically formulated for metallographic sample preparation and offer a higher concentration of diamond compared with suspensions. They are water soluble and compatible with glycol, water or alcohol based lubricants. Diamond compounds are typically used as a stand alone product or as a "base" before applying diamond suspension to polishing cloths.
Our diamond powder can be used for grinding, polishing, & lapping applications. We offer natural diamond powder and synthetic diamond powder; monocrystalline as well as polycrystalline in a wide range of sizes from sub-micron sizes (1/10 micron) to a more abrasive size of 80-120 micron. This diamond powder can be mixed with a carrier such as water, oil, extender oil, mineral oil, vegetable oil, or petroleum jelly. It makes an excellent diamond paste. Packaged in 25-carat or 50-carat vials & larger container sizes upon request.
UKAM Industrial Superhard Tools manufacturers & offers large variety of cutting machines for Laboratory & Industry. Applications range for R & D, Sample Preparation, Failure Analysis, Material Research, & many other industrial applications. Examples of materials cut include: ceramics, composites, glass, plastics, quartz, metals, petrographic samples and graphite. From high capacity cutting of very large work pieces to precision cutting of even the most delicate samples
6" to 24" (150mm to 609mm) diamond grinding, polishing, & lapping machines for Industry and R & D. Designed coarse & fine grinding and polishing of Advanced, Ultra Hard & Brittle Materials, Optical Materials, Composites. High hardness materials including
We produce diamond consumables for some of the leading world OEM manufacturers. We offer Manufacturers Direct Prices
We have the largest variety of diamond & cbn wafering blades available in stock. As well as large inventory of diamond & abrasive consumables. We also custom manufacture diamond and cbn tools, consumables and machines to better fit customer specific needs. Just about any tools & consumables can be designed and manufactured per client drawing or specificrtion
Developing close ties with our customers is the foundation of our business. At the core of
our company is a team of world class engineers, knowledgeable customer service personnel here to serve you. Whether is designing or manufacturing a special solution. We will go out of our way to optimizing your process to ultimate level of efficiency
Our proprietory diamond chemistory , precision , manufacturing metods , quality control methods allow us to control and regulate the dozens of variables to that affect consumable life , quality , and consistency.
The more you understand about what we can do for you the better our partnership will be. Here you will find most comprehensive source of information and optimizing and improving your cutting , drilling , grinding and polishing on the web. find everything you ever wanted to know about diamond tools.
As one of the few remaining independent U.S.Diamond Tool & machine builders. We have the experience & tradition to help you remain at frontier of technology Our experience has been further enhanced by acquiring assets and processes from some of the oldest American tool
manufacturers, along with their decades of experience and R& D. This has positioned us as one of the most experienced companies in the industry .Depend on us to bring you technology of tomorrow today.
Over the years we have worked with some of the leading Fortune 500 companies , thousands of universities , government and private research labs , and small organisations. We have made thousands of custom tools , built custom machines , work-holding fixtures , etc for hundreds of applications. Many of our staff members have been working in their respective fields for over 50 years and have gained a wealth of knowledge over the years
Carrier information.
Payment methods.
Unlimited help desk.
View our benefits.
Track or cancel orders.
No products in the Quote Basket.
No account yet?
Create an AccountWill be used in accordance with our Privacy Policy