UKAM Industrial Superhard Tools

661-257-2288

9 am to 6 pm
PST time

SMART CUT® 6018
Automatic Saw

SMART CUT™ 6018 Automatic Laboratory Precision Saw is a variable speed cutting machine that can adjust the rpm’s and feed rate to the material being cut. The Machine is variable speed from 500 to 3,000 RPM’s. With the touch screen control, the display is clear and the function layout is reasonable. The feed of cutting can be controlled by controlling the blade feed or by cutting table feed and adjust according to the different materials or user preference. The machine will cut automatically according to programmable parameters.

Get A Quote

1. Cut-off wheel

2. Spray nozzle

3. Cutting table

4. Quick clamp

5. Water tank

6. Touch screen

7. Hand wheel

8. Emergency stop button

9. Locking handle

10. Pushing rod

11. Cover

12. Power

13. Power switch

14. Limit switch

SMART CUT 6018 has a wide range of sizes and shapes with ultra-flexible and movable T-slot table.

The cutting table in this machine allows you both ultra-precision and flexibility for a wide range sizes and shapes. You are able to section large and deep workpieces 415(L) x 30(W) x30(H)mm. minimum material thickens: 5mm

maximum material thickness: 30mm The table has 8 mm t-slots and you can choose between a wide range of clamping tools to find just the right fit for your cut and the highest degree of precision. The machine comes with vertical clamp and standard vice as pictured here already included into the price of the machine

Optional Material Holding Fixtures/chucks – to hold most material

Suited for large variety of materials and applications

Machine comes with built in recirculating stainless steel filter and coolant tank

coolth comes through the nozzles here, providing right point of contact between coolant and blade and material being cut

SMART CUT® Coolants

Your choice of one (1) quart of SMART CUT™ Water Soluble Coolant or Mineral Oil is included with machine. SMART CUT™ Water Soluble Coolant Reduces material thermal stress, edge damage, and internal cracking, increases blade life, provides better cut quality, preserves material micro structure

Hence, assuring long-term integrity of material being sectioned. Since SMART CUT coolant is both a coolant and lubricant, both the wafering blade and material benefit. Mix ratio is 1:20 (1 part coolant, 20 parts water) on very hard and dense materials and 1:40 (1 part coolant, 40 parts water) on softer materials. Depending on mix ratio 1 quart will produce 5.7 to 9 gallons of coolant when mixed with water. As a coolant, SMART CUT KOOL reduces heat caused by friction. As a lubricant, SMART CUT KOOL lowers friction and surface tension, which increases swarf dispersion. Find out More >>>

LARGEST SELECTING OF DIAMOND & CBN WAFERING BLADES AVAIALBLE

one (1) diamond wafering blade any specification is included FREE OF CHARGE with purchase of any machine (any specification). we have almost unlimited number of diamond & CBN wafering blade specifications in stock available for immediate delivery. Available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness’s. With several thousand unique blade specification in stock not listed on our standard stock program. This insures you will receive the best blade specification possible for your specific application. (Please see our guide on Selecting Right Blade for your Application).

UNBEATABLE LOW PRICES

You will find our prices are very affordable. What you will save on the cost of consumables in short and long run will pay for this equipment within a relatively short period of time.

THE RIGHT DRESSING STICK FOR YOUR APPLICATION

One (1) dressing stick is included with the purchase of any machine free of charge. The dressing stick we supply is similar to the diamond size of the wafering blade you have chosen (or we recommended) for your application. Wafering Blades must be diamonds particles/crystals exposed properly through frequent dressing. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and/or heat cracks in the wafering blade and/or material being cut. Resulting in premature blade wear, blade tensioning problems, and will eventually destroy the blade. The more frequently the blade is dressed the freer and cooler it will cut with lot more consistency. Please see more info about dressing sticks>>>

Related Products

Recently Viewed Products

FREE SHIPPING

Carrier information.

ONLINE PAYMENT

Payment methods.

24/7 SUPPORT

Unlimited help desk.

100% SAFE

View our benefits.

FREE RETURNS

Track or cancel orders.

Shopping cart
CURABITUR ALIQUET QUAM POSUERE

DO YOU LIKE THE THEME? SHARE WITH YOUR FRIENDS!

Will be used in accordance with our Privacy Policy

X