UKAM Industrial Superhard Tools

661-257-2288

9 am to 6 pm
PST time

SMART CUT® 6030
Automatic Precision Saw

SMART CUT® 6030 is an versatile automatic precision section saw with 2 axis control, designed for cutting all types of materials with ease. It allows for the cutting of all types of materials with selected cutting wheels offering low deformation cutting. SMART CUT 6030 offers a cutting capacity of 40mm diameter with height adjustment of the wheel of 40mm offering wheel wear compensation.

Get A Quote

SMART CUT 6030 precision cutting machine has advanced technology and software with programmable HMI touch screen controls increasing the productivity, sample consistency and minimize operator intervention. Control of X/Y/Z Axis can also be performed with the ergonomic proportional Joystick that offers smooth and precise positioning. versatile precision automatic saw featuring gentle sectioning at slow speeds and low feed rates up to high speeds with high feed rates.

large variety of chucks are available to accommodate almost all material shapes and sizes. Custom holding fixtures can be designed for specialized requirements

The SMART CUT 6030 has a graphic display to show how the saw is operating in order to optimize cutting efficiency.

Additionally, the feed rate, depth of cut, number of cuts or slices are monitored. A status bar also shows how far along the cut has progressed.

The T-slot table allows a wide range of clamping and fixturing options available to accommodate a variety of sample shapes and sizes. 250 X 200mm, which can accommodate large range of material sizes and shapes

The machine is equipment with automatic limit/ cut off witch which stops the blade operation and retracts the table to its origional position

SMART CUT® Coolants

Your choice of one (1) quart of SMART CUT™ Water Soluble Coolant or Mineral Oil is included with machine. SMART CUT™ Water Soluble Coolant Reduces material thermal stress, edge damage, and internal cracking, increases blade life, provides better cut quality, preserves material micro structure

Hence, assuring long-term integrity of material being sectioned. Since SMART CUT coolant is both a coolant and lubricant, both the wafering blade and material benefit. Mix ratio is 1:20 (1 part coolant, 20 parts water) on very hard and dense materials and 1:40 (1 part coolant, 40 parts water) on softer materials. Depending on mix ratio 1 quart will produce 5.7 to 9 gallons of coolant when mixed with water. As a coolant, SMART CUT KOOL reduces heat caused by friction. As a lubricant, SMART CUT KOOL lowers friction and surface tension, which increases swarf dispersion. Find out More >>>

LARGEST SELECTING OF DIAMOND & CBN WAFERING BLADES AVAIALBLE

one (1) diamond wafering blade any specification is included FREE OF CHARGE with purchase of any machine (any specification). we have almost unlimited number of diamond & CBN wafering blade specifications in stock available for immediate delivery. Available in different sizes, thickness, arbor sizes, diamond concentrations, diamond mesh sizes, and bond hardness’s. With several thousand unique blade specification in stock not listed on our standard stock program. This insures you will receive the best blade specification possible for your specific application. (Please see our guide on Selecting Right Blade for your Application).

THE RIGHT DRESSING STICK FOR YOUR APPLICATION

One (1) dressing stick is included with the purchase of any machine free of charge. The dressing stick we supply is similar to the diamond size of the wafering blade you have chosen (or we recommended) for your application. Wafering Blades must be diamonds particles/crystals exposed properly through frequent dressing. Otherwise, the diamond tool will glaze over. They will begin to tear rather than grind which is very destructive. Tearing caused from unexposed diamonds creates friction. This causes uneven wear and/or heat cracks in the wafering blade and/or material being cut. Resulting in premature blade wear, blade tensioning problems, and will eventually destroy the blade. The more frequently the blade is dressed the freer and cooler it will cut with lot more consistency. Please see more info about dressing sticks>>>

Related Products

Recently Viewed Products

FREE SHIPPING

Carrier information.

ONLINE PAYMENT

Payment methods.

24/7 SUPPORT

Unlimited help desk.

100% SAFE

View our benefits.

FREE RETURNS

Track or cancel orders.

Shopping cart
CURABITUR ALIQUET QUAM POSUERE

DO YOU LIKE THE THEME? SHARE WITH YOUR FRIENDS!

Will be used in accordance with our Privacy Policy

X